Spent Fuel Pool Dose Rate Calculations Using Point Kernel and Hybrid Deterministic-Stochastic Shielding Methods

Authors

  • Mario Matijević
  • Radomir Ječmenica
  • Davor Grgić

DOI:

https://doi.org/10.37798/2016651-2138

Keywords:

pool dose rate, point kernel, hybrid deterministic-stochastic, Microshield, SCALE/MAVRIC, MCNP, ADVANTG, FW-CADIS

Abstract

This paper presents comparison of the Krško Power Plant simplified Spent Fuel Pool (SFP) dose rates using different computational shielding methodologies. The analysis was performed to estimate limiting gamma dose rates on wall mounted level instrumentation in case of significant loss of cooling water. The SFP was represented with simple homogenized cylinders (point kernel and Monte Carlo (MC)) or cuboids (MC) using uranium, iron, water, and dry-air as a bulk region materials. The pool is divided on the old and new section where the old one has three additional subsections representing fuel assemblies (FAs) with different burnup/cooling time (60 days, 1 year and 5 years). The new section represents the FAs with the cooling time of 10 years. The time dependent fuel assembly isotopic composition was calculated using ORIGEN2 code applied to the depletion of one of the fuel assemblies present in the pool (AC-29). The source used in Microshield calculation is based on imported isotopic activities. The time dependent photon spectrum with total source intensity from Microshield multigroup point kernel calculations was then prepared for two hybrid deterministic-stochastic sequences. One is based on SCALE6.2b3/MAVRIC (Monaco and Denovo) methodology and another uses Monte Carlo code MCNP6.1.1b and ADVANTG3.0.1. code. Even though this model is a fairly simple one, the layers of shielding materials are thick enough to pose a significant shielding problem for MC method without the use of effective variance reduction (VR) technique. For that purpose the ADVANTG code was used to generate VR parameters for the MCNP fixed-source calculation using continuous energy transport. ADVATNG employs a deterministic forward-adjoint transport solver Denovo which implements CADIS/FWCADIS methodology. Denovo uses a structured, Cartesian-grid SN solver based on the Koch- Baker-Alcouffe parallel transport sweep algorithm across x-y domain blocks. This was our first application of ANDVANTG/MCNP hybrid sequence for this type of calculation and the results where compared to SCALE/MAVRIC sequence which we regularly use for similar calculations. The comparison of gamma dose rates on different point detector locations (central above pool and at the top of pool periphery) showed a good agreement between Microshield (point-kernel) and deterministic-stochastic shielding methodologies for the cylindrical approximation of the pool geometry. More complicated cases for model with multi-source option and for cuboids showed very good agreement between SCALE/MAVRIC and ANDVANTG/MCNP calculations.

Downloads

Download data is not yet available.

Published

2022-06-28